Lath Mix
Base coat formulated for use over timber laths
£14.50 plus vat
Depth per coat- 8-10mm recommended for lath (can be built out thicker)
Supplied as- wet mixed in 11L tubs (tubs made from 70% recycled plastic and are 100% recyclable).
Coverage/tub- 1.3sqm-1.1sqm at 8-10mm
Pallet size- 48 tubs per full pallet
Ingredients- clay / sand / straw
Lead time- made to order usually dispatched within 5-10 days.
Base coat formulated for use over timber laths
£14.50 plus vat
Depth per coat- 8-10mm recommended for lath (can be built out thicker)
Supplied as- wet mixed in 11L tubs (tubs made from 70% recycled plastic and are 100% recyclable).
Coverage/tub- 1.3sqm-1.1sqm at 8-10mm
Pallet size- 48 tubs per full pallet
Ingredients- clay / sand / straw
Lead time- made to order usually dispatched within 5-10 days.
Base coat formulated for use over timber laths
£14.50 plus vat
Depth per coat- 8-10mm recommended for lath (can be built out thicker)
Supplied as- wet mixed in 11L tubs (tubs made from 70% recycled plastic and are 100% recyclable).
Coverage/tub- 1.3sqm-1.1sqm at 8-10mm
Pallet size- 48 tubs per full pallet
Ingredients- clay / sand / straw
Lead time- made to order usually dispatched within 5-10 days.
A very fibrous, sticky mix creating a robust clay plaster formulated for use on lath but can also be used on most other typical substrates.
This mix can have lime added on request, lime helps stabilise the lath coat to avoid loss of strength when re-wetted during the application of subsequent coats.
Recommended at 8mm-10mm over lath but due to its fibrous nature it can be built out much thicker when used to fill hollows or level other substrates.
This mix can even be trowelled or floated to a finish making it an extremely versatile plaster.